Blazing Splice Snap-Locking Waterproof Connectors Are Pre-Filled with Silicone! Formerly known as SNAPLOC Low-Voltage Wire Connectors...Best low-voltage connections for underground dog fences, landscape lighting, irrigation & more...
Exculsive Features: 100% Waterproof Quick, compact and easy!
Blazing Wire Connectors are the low-voltage wire connectors designed for the professional pet fence installer. Unlike twist-on connectors, you never have to doubt the connection. 
Superior Performance When it Counts Snap-Locking connectors eliminate common install problems: - Locking - Never loosens or dangles off wires
- Foolproof - Never fails to grab the wires
- Easy - Compact 5-second installation
- No Mess - Silicone encapsulates connection and will not melt out
- No Tunneling Effect - No channel for moisture to follow into the connection
- Vibration Proof - Connection stays secure
Locks Tight with Double O-Ring Seals!
Just squeeze and lock to hydraulically pump and pack waterproofing silicone. Pre-filled silicone fully encapsulates all bare wires, closing all entryways against moisture and corrosion. A double O-ring seal bars water from creeping in, and latches lock the connector around the wires. Blazing Wire Connectors are vibration-proof and never dangle off the wires. Say Goodbye to Traditional Connector Problems- Eliminate Expensive Call-Backs Because of Faulty Wiring! Professionals generally check the wiring first when examining a faulty pet containment system because traditional connectors regularly fail to maintain the connection and protect it from moisture and corrosion. Blazing Wire Connectors are the solution - They're the economical connectors that make the connection first and seal it second. "A poor wire connection will always lead to an expensive and time-consuming call back. A call back takes time and money out of your pocket... Unlike ordinary twist-on wire connectors that traditionally cause gaps into which moisture can enter and accumulate..." Snaploc wire connectors are 100-percent water resistant! --Tech Times, Official quarterly of Irrigator Technical Training School, CA ("Snaploc...Innovation at Its Best!", Fall 2001) Additional Tools Required: None! Instructions: 
Strip wires 3/4" and group bare wire ends together. No pre-twisting necessary with solid wire. Pre-twist stranded wire. If using both wire types, wrap stranded wire around solid wires (see illustration 1A). Insert wires through flexible sealing fingers and bend wires into either "V-Channel". Push inner sleeve into pre-filled outer sleeve until double-locked. Pre-filled silicone fully waterproofs the connection. Do not reuse connector! This Item Includes: - One Blazing Splice Snap-Locking Waterproof Connector


|